dc60 series ? bi-polar transistor output ? ratings from 3a to 7a @ 60 vdc ? ac or dc control ? ul and cul recognized (e116950) product selection control voltage 3a 5a 7a 3.5-32 vdc dc60s3 DC60S5 dc60s7 90-280 vrms/vdc dc60sa3 dc60sa5 dc60sa7 available options output specifications (1) description 3a 5a 7a operating voltage [vdc] 3-60 3-60 3-60 maximum off-state leakage current @ rated voltage [ma] 0.1 0.1 0.1 maximum load current [adc] (2) 3 5 7 minimum load current [ma] 20 20 20 maximum surge current [adc] (10ms) 6 10 14 maximum on-state voltage drop @ rated current [vdc] 1.3 1.5 1.7 thermal resistance juncti on to case (rjc) [c/w] 2.2 2.2 2.2
input specifications (1) description dc60sx dc60sax control voltage range 3.5-32 vdc 90-280 vrms/vdc minimum turn-on voltage (3) 3.5 vdc 90 vrms/vdc minimum turn-off voltage (4) 1.0 vdc 10 vrms/dc typical input current 2.2 ma @ 5 vdc 2 ma @ 120 v, 4 ma @ 240 v nominal input impedance 1500 ohm 60k maximum turn-on time [msec] (5) 0.1 10 maximum turn-off time [msec] (6) 0.3 40 general specifications description parameters dielectric strength, input/o utput/base (50/60hz) [vrms] 4000 minimum insulation resistance (@ 500 v dc) 10 9 ohm maximum capacitance, input/output 8 pf ambient operating temperature range -30 to 80c ambient storage temperature range -40 to 125 c weight (typical) 3.0 oz (86.5g) encapsulation thermally conductive epoxy terminals screws and saddle clamps furnished, unmounted recommended terminal screw torque range: 6-32 screws - 10 in lbs. 8-32 and 10-32 scre ws -20 in. lbs. (screws dry without grase) general notes 1) all parameters at 25c unless otherwise specified. 2) heat sinking required, see derating curves. 3) minimum turn-on voltage for ?b, dc control is 1vdc and ac control is 10vrms/vdc. 4) minimum turn-off voltage for ?b, dc control is 3.5vdc and ac control is 90vrms/vdc. 5) turn-on time for ?b version is 300 s 6) turn-off time for ?b version is 100 s. mechanical specifications
thermal derate information wiring diagram agency approvals designed in accordance with the requirements of iec 62314 e116950 rev. 080812
annex - enviromental information
|